グリースガンをプライミングする方法
Grease guns are an essential part of any mechanical workshop or facility. Grease guns make it easy to distribute lubrication to the moving parts of all types of machines. In a mechanic's workshop, a grease gun might be used to apply grease to ball joints, U-joints in the drive shaft, tie rod ends or wheel bearings. When using a grease gun, you will want to have an even distribution of grease with each pump of the gun's handle. This can be achieved by priming the grease gun before placing the nozzle of the gun next to the equipment.
ステップ1
T-ハンドルとロッドをグリースガンから引き出します。 ハンドルを少し押し下げて、開いた位置にロックします。 ガンにグリースを入れている間、ハンドルが開いたままにするための小さな溝があります。
ステップ2
グリースガン内の金属シリンダーを緩め、空のグリースカートリッジを引き出します。 シリンダーはノズルの近くのガンにねじ込まれます。
ステップ3
新しいグリースチューブの一方の端からゴム製またはプラスチック製のキャップを引き抜きます。 もう一方の端から金属タブを引き抜きます。 新しいグリースチューブを金属シリンダーにスライドさせて、金属-タブの端がディスペンシングノズルの方を向くようにします。 シリンダーをグリースガンの所定の位置にねじ込みます。
ステップ4
T -ハンドルとロッドのロックを解除し、新しいグリースチューブに2〜3回押し込みます。 これにより、チューブの背面から空気を押し出し、グリースを流すためのチャネルが作成されます。
ステップ5
グリースがディスペンシングノズルを通って一貫して流れ始めるまで、ガンのハンドルを数回握ります。 床や作業台にグリースが付着しないように、ゴミ箱や店のぼろきれの上でこれを行う必要があります。
ステップ6
Unscrew the bleed screw at the top of your grease gun and pump the handle a few times to open up the flow of your grease gun. Tighten the screw once the grease is dispensing freely. You usually won't have to perform this step unless the grease in your new tube is cold and heavy.
グリースを塗布しているときにグリースガンがプライムを失った場合は、T -ハンドルとロッドを引き抜いて、ポンプで数回出し入れします。





